中国旅游业CO_2排放区域差异的空间分析

在旅游业节能减排形势严峻的背景下,深入研究中国旅游业CO_2排放问题,制定科学的区域节能减排政策已刻不容缓。本文首先运用"自下而上"法,估算了1993-2012年中国整体旅游业、旅游业各分部门、大陆各省区(不含西藏)旅游业CO_2排放量。在此基础上,对全国及三大地带旅游业CO_2排放的总体特征进行分析;利用Theil指数法分析了中国旅游业CO_2排放强度的区域差异、区域内差异和区域间差异;运用AreView软件对中国旅游业CO_2排放强度的省际差异进行直观图示。分析结果显示:1993-2012年,中国旅游业CO_2排放量从1 480.868×10~4t升至6 274.129×10~4t;全国及三大地带旅游业CO_2排放强度整体上呈现出先显著下降、再缓慢梯度下降的趋势;中国旅游业CO_2排放强度空间分布不均匀,东部地区旅游业CO_2排放强度低于中部和西部地区;中国旅游业CO_2排放强度的区域总体差异、区域间差异和区域内差异整体呈逐渐缩小的趋势,区域间差异对总体差异的贡献率为94%-98%,区域间差异占主导地位;中国旅游业CO_2排放强度省际差异明显,属于旅游业CO_2排放强度弱显著区的省区基本位于东部沿海地区,河北、湖南、河南、广西、甘肃和新疆等省区频繁出现在旅游业CO_2排放强度强显著区之列,因此上述省区应是中国旅游业CO_2未来节能减排的区域重点。据此提出差别化的CO_2减排对策:东部地区应通过技术改进和调整产业结构、能源消费结构来降低CO_2排放强度,并以此带动中部和西部地区旅游业节能减排;中部和西部地区应加强与东部地区合作,将提高能源使用率、降低CO_2排放强度作为旅游业减排工作的重点。     

基于LCA的废旧资源循环利用节能减排效果评估模式与方法研究——以吉林省某钢铁企业为例

促进废旧资源循环利用是加快推进我国生态文明建设,完成节能减排目标的必然选择。本文基于生命周期评价模式,从微观企业层面入手,构建产品全生命周期基准流程,引入能量输入与环境输出参数,建立废旧资源循环利用节能减排效果量化核算模型,评估再生产品的节能减排经济成效,并以吉林省某钢铁企业为例,评估"废钢-电炉"短流程和"铁矿石-高炉-转炉"长流程的能源、环境、成本差异,辨识影响废钢再循环节能减排效果的主要因素和重要环节。结果显示,再生钢铁全生命周期与原生钢铁全生命周期相比,节能588.48kgce/t,节能率为84%;主要污染物中SO2减排率最高,达92%;CO2总减排1 180.92 kg/t,减排率为67%;总成本却高出198元/t。其中,炼铁工序的节能量和减碳量最大,烧结工序SO2、NOx和烟(粉)尘减排量最大,焦化工序COD和氨氮减排量最大,回收、加工处理、炼钢环节节能量和减碳量以及SO2、NOx和烟(粉)尘减排量均为负。成本方面,再生钢铁生产成本高于原生钢铁308元/t,虽然再生钢铁由于污染减排可节省56元/t的排污费并获取54元/t的碳交易收益,但都不足以扭转电炉炼钢费用较高的现状。因此,国家应在电炉炼钢方面给予钢企及相关企业适当的财税扶持政策,在电价方面给予钢企一定的优惠或补贴,并完善废钢回收加工体系等,以促进废钢循环利用。基于LCA的废旧资源循环利用节能减排效果评估可以实现对产品生命周期全过程的资源、环境、成本的优化管理。     

Carbon dioxide emissions from cities in China based on high resolution emission gridded data

Based on the China high resolution emission gridded data (1 km spatial resolution), this article is aimed to create a Chinese city carbon dioxide (CO₂) emission data set using consolidated data sources as well as normalized and standardized data processing methods. Standard methods were used to calculate city CO₂ emissions, including scope 1 and scope 2. Cities with higher CO₂ emissions are mostly in north, northeast, and eastern coastal areas. Cities with lower CO₂ emissions are in the western region. Cites with higher CO₂ emissions are clustered in the Jing-Jin-Ji Region (such as Beijing, Tianjin, and Tangshan), and the Yangtze River Delta region (such as Shanghai and Suzhou). The city per capita CO₂ emission is larger in the north than the south. There are obvious aggregations of cities with high per capita CO₂ emission in the north. Four cities among the top 10 per capita emissions (Erdos, Wuhai, Shizuishan, and Yinchuan) cluster in the main coal production areas of northern China. This indicates the significant impact of coal resources endowment on city industry and CO₂ emissions. The majority (77%) of cities have annual CO₂ emissions below 50 million tons. The mean annual emission, among all cities, is 37 million tons. Emissions from service-based cities, which include the smallest number of cities, are the highest. Industrial cities are the largest category and the emission distribution from these cities is close to the normal distribution. Emissions and degree of dispersion, in the other cities (excluding industrial cities and service-based cities), are in the lowest level. Per capita CO₂ emissions in these cities are generally below 20 t/person (89%) with a mean value of 11 t/person. The distribution interval of per capita CO₂ emission within industrial cities is the largest among the three city categories. This indicates greater differences among per capita CO₂ emissions of industrial cities. The distribution interval of per capita CO₂ emission of other cities is the lowest, indicating smaller differences of per capita CO₂ emissions among this city category. Three policy suggestions are proposed: first, city CO₂ emission inventory data in China should be increased, especially for prefecture level cities. Second, city responsibility for emission reduction, and partitioning the national goal should be established, using a bottom-up approach based on specific CO₂ emission levels and potential for emission reductions in each city. Third, comparative and benchmarking research on city CO₂ emissions should be conducted, and a Top Runner system of city CO₂ emission reduction should be established.     

Using multivariate regression modeling for sampling and predicting chemical characteristics of mixed waste in old landfills

Municipal solid waste landfills pose a threat on environment and human health, especially old landfills which lack facilities for collection and treatment of landfill gas and leachate. Consequently, missing information about emission flows prevent site-specific environmental risk assessments. To overcome this gap, the combination of waste sampling and analysis with statistical modeling is one option for estimating present and future emission potentials. Optimizing the tradeoff between investigation costs and reliable results requires knowledge about both: the number of samples to be taken and variables to be analyzed.This article aims to identify the optimized number of waste samples and variables in order to predict a larger set of variables. Therefore, we introduce a multivariate linear regression model and tested the applicability by usage of two case studies. Landfill A was used to set up and calibrate the model based on 50 waste samples and twelve variables. The calibrated model was applied to Landfill B including 36 waste samples and twelve variables with four predictor variables.The case study results are twofold: first, the reliable and accurate prediction of the twelve variables can be achieved with the knowledge of four predictor variables (Loi, EC, pH and Cl). For the second Landfill B, only ten full measurements would be needed for a reliable prediction of most response variables. The four predictor variables would exhibit comparably low analytical costs in comparison to the full set of measurements. This cost reduction could be used to increase the number of samples yielding an improved understanding of the spatial waste heterogeneity in landfills.Concluding, the future application of the developed model potentially improves the reliability of predicted emission potentials. The model could become a standard screening tool for old landfills if its applicability and reliability would be tested in additional case studies.     

中国碳排放强度的时空演进及跃迁机制

面对气候变化所带来的生存危机以及环境治理的复杂状况,对中国碳排放强度时空演进的动态监测与预警治理的研究是实现碳排放强度下降目标的关键。文章测算1997—2015年中国大陆30个省区碳排放强度的空间面板数据,采用探索性时空数据分析(ESTDA)方法对中国碳排放强度的空间相关性、集聚特征及其时空跃迁进行空间统计分析,借助分位数回归与时空跃迁嵌套模型,揭示在时间和空间推移的双重作用下中国各省区碳排放强度的时空跃迁机制。研究结果表明:(1)中国30个省区的碳排放强度在时空分布上并不是完全随机状态,各个省区碳排放强度之间具有显著的空间相关性特征,碳排放强度的变动趋势会受到其相临近省区碳排放强度的影响,省域间的碳排放强度在空间分布上呈现"集聚"与"分异"并存的时空演进特征。(2)中国碳排放强度空间集聚趋势增强,具有高度的凝固性和较低的流动性,10个高碳排放强度省区碳排放强度的稳定性将成为制约中国碳排放强度整体跃迁的重点省区,相关省区的跃迁性将成为驱动中国碳排放强度整体跃迁的关键省区。(3)各省区的碳排放强度空间集聚过程中存在时空跃迁的驱动模式和制约模式,分位数回归模型能够很好地解释各驱动因素对碳排放强度时空跃迁的驱动机制,不同响应阶段的驱动因素的分位数与碳排放强度时空跃迁类型之间具有很强的嵌套性。(4)根据各省区碳排放强度时空演进及其跃迁机制的分析结果,进一步提出加强对关键省区碳排放强度的有效监测与治理,加大碳排放的约束力度等差异化的碳减排调控措施。     

地下停车库空气污染物排放实测研究

通过对上海市某商业地下停车库库内及排风管道的连续监测,获得了CO、NO、非甲烷总烃(NMHC)、PM10等空气污染物浓度数据。结果表明:(1)地下停车库的休息日车流量明显大于工作日,且工作日小时车流与车位比为20%~50%、休息日小时车流与车位比为20%~80%。(2)总体上,地下停车库内CO、NO、NMHC浓度呈明显变化规律,营业时间现峰值,非营业时间现谷值;地下停车库内CO、NO、NMHC变化规律和车库排风中具有较好的一致性。(3)车库排风中污染物浓度水平均低于地下停车库内。(4)营业时间的CO、NO、NMHC小时浓度平均值明显增大,约为非营业时间的2.42~3.67倍。(5)单车次CO、NOX、NMHC排放量最大值分别为0.855、0.070、0.214g/(辆·次)。(6)营业时间,除地下停车库内CO外,NO、PM10的8h时间加权平均值符合《工作场所有害因素职业接触限值化学有害因素》(GBZ 2.1—2007,其中未规定NMHC)中时间加权平均容许浓度(PC-TWA);地下停车库内CO出现33.3%的超标频率,最大占标率104%。     

燃煤电厂在线监测系统颗粒物浓度排放系数影响因素的探讨

选取上海市7家未安装气-气换热器的国控燃煤电厂作为研究对象，从煤质、除尘器、脱硫协同脱除作用以及锅炉工况负荷等方面探讨对颗粒物浓度排放系数 K值产生的影响，得出上述因素通过改变脱硫进口颗粒物浓度值影响 K值，当脱硫进口颗粒物浓度较低、波动范围较小时，其 K值也维持相对稳定的状态；当脱硫进口颗粒物浓度较高、波动范围较大时，其 K值也会发生较大的变化等结论。     

中国工业碳排放达峰的情景预测与减排潜力评估

实现2030年碳排放达峰不仅是中国为应对全球气候变化向国际社会做出的郑重承诺,也是中国未来经济结构转型与可持续发展的必然选择。基于中国实现2030年碳排放达到峰值的宏观目标为背景,本文以中国碳排放的主要行业工业为研究对象,首先运用拓展的STIRPAT模型对工业及其9个细分行业的碳排放达峰进行了情景预测,然后基于公平和效率的双重视角对工业细分行业的减排潜力进行评估。研究表明:(1)仅有低碳情景和抑制排放情景2可以实现中国碳排放2030年达峰,低碳情景是实现中国工业碳排放达峰的最佳发展模式,达峰时间最早(2030年),峰值最低(140.43亿t)。激进排放情景则是最差的发展模式,达峰时间最晚(2036年),峰值也最高(150.09亿t)。(2)工业内部各细分行业碳排放的最优达峰情景差别较大。建材和纺织制造业能够实现提前达峰,可以在这类行业率先实施达峰管理措施,使其带动其他行业陆续达峰。(3)最具减排潜力的行业是石油制造业,其次是电力行业,这些减排潜力较大的行业应该成为国家节能减排的重点对象。(4)基于工业各细分行业在减排公平性和效率性上的差异将工业9个细分行业分为四类。其中,石油、钢铁制造业和电力行业属于"高效高公平行业";化工、建材制造业属于"低效高公平行业";采掘业属于"高效不公平行业";纺织、轻工和机电制造业属于"低效不公平行业"。中国应针对不同类型的行业制定出相应的减排战略,将减排重点放在各行业最具潜力的方面。最后,文章对实现中国工业碳排放达峰管理提出了几点政策建议。     

电感耦合等离子体发射光谱法测定石化废水中的重金属

建立了硝酸加热消解后采用电感耦合等离子体发射光谱(ICP-OES)测定石化废水中重金属(As,Cd,Cr,Cu,Zn,Pb,Mn)的方法,优化了仪器工作参数,得到了线性回归方程,并对该方法进行了评价。优化后的仪器工作参数为射频功率1 150 W、雾化器流量0.70 L/min、辅助气流量0.50 L/min。各重金属元素回归方程的相关系数均在0.999 9以上,检出限为0.000 18~0.007 00 mg/L,相对标准偏差为0.1%~2.0%,加标回收率为96.3%~102.2%。该方法具有线性关系好、检出限低、精密度和准确度高、分析速度快等优点。     

Techno-economic and environmental analysis of an integrated standalone hybrid solar hydrogen system to supply CCHP loads of a greenhouse in Iran

The techno-economic and environmental performance of hybrid solar hydrogen energy systems was investigated to provide combined cooling, heating and power (CCHP) demands of a standalone greenhouse in Iran to achieve sustainable agriculture based on an optimization procedure. From the environmental point of view, by deploying hybrid energy systems, 83%, to 100% of emissions can be avoided. Also a sensitivity analysis was performed on the hybrid energy systems in order to study the effect of major parameter variation on the systems justification. It was concluded that hybrid solar systems are economically competitive with conventional systems, for high solar intensity locations with high diesel fuel prices and decreased prices for PV and hydrogen storage technology.